Ring:bit Car Study Case 02——Draw Circle

About: ElecFreaks is an open design house founded in March 2011. Our goal is to create rapid prototypes and give small-batch manufacture solution for makers and startups. With over 50% staff as engineers and expand...

In this study case, you are going to learn how to make your ring:bit car draw a circle.

Step 1: Material Needed

1 x Ring:bit Car Kit

1 x micro:bit

3 x AA Batteries

1 x Pen

Step 2: Assembly

Please read our pamphlet within the package for the process of ring:bit car assembly. You have to prepare micro:bit and AA batteries by your own.

Once you have completed assembling your car, bind the pen to the tail of your car using a rubber band.

Step 3: ​Software

Step 4: Programming

For the whole program, please refer to the link here: https://makecode.microbit.org/_VUcg0t2yKEfW

Or, you can download it directly by the website below.

Step 5: Think

How to make your ring:bit car run a square path?

Step 6: Contact

Share

    Recommendations

    • Arduino Contest 2019

      Arduino Contest 2019
    • Trash to Treasure

      Trash to Treasure
    • Tape Contest

      Tape Contest

    Discussions