Maker : Deepak
Location : Banjaraplya E4D Makerspace
i did this rocket in Banjaraplya E4D Makerspace .
- Aluminium fail
- Small tube(or)cylinclicul object
- paper tape
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Roll the Stick With Aluminium Fail
Roll the stick with aluminium fail in only 2 roll as shown in image.
Step 2: Put the Other Aluminium Fail
Put the other aluminium fail of the other aluminium fail as shown in image.
Step 3: Open the Aluminium Fail
Open the aluminium fail as shown in image.
Step 4: Cut the Match Stick
Cut at the edge of the match stick as shown in the image.
Step 5: Put the Aluminium Fail
Put the aluminium fail's hole in the hole you want to put the cutted match stich in the aluminium fail as shown in image.
Step 6: Make the Match Box to the Rocket Stand
Make the match box to the rocket to the stand like i made with match stich witch is empty box see in the image.
Step 7: Fix Aluminium Fail to Match Box Stand
Fix Aluminium fail to match box stand
Step 8: Finally My Projects Is Finish
Finally my projects is finish .