Roller Coaster/Sports Glasses Case Holder

3,433

7

4

Intro: Roller Coaster/Sports Glasses Case Holder

 This is a glasses case holder that hooks to your belt loop to hold your glasses while you ride roller coasters. Its can fit in your pocket and will hopefully stop your glass from getting lost. 
Please vote for this in the paracord contest is you enjoyed it
www.instructables.com/contest/paracord/

Step 1: What You Need

 Materials:
Paracord or String
Glasses Case
Mini Climbers Clip
 
Tools:
Lighter
Drill
Drill Bit(The size of your cord) 

Step 2: Drill the Hole

 Open your case and drill a hole in the top of you case.

Step 3: Thread,Tie,Melt

 Thread the cord through the hole and tie a knot at the end. Now melt the cord at the knot to stop it from unraveling. Finally tie a knot on the outside of the case.

Tip: Wrap the end of the cord in tape before threading it

Step 4: Measure and Add the Clip

 First put your case in your pocket and let the string hang out. Then put the clip on you belt loop. Measure the length to your clip and tie it off. Leave a little slack so it will be ablle to hook on different belt loops. Finally melt the knot on the clip.

Step 5: Your Done

 Now where it to the amusment park and have fun.

Share

    Recommendations

      • Metalworking Contest

        Metalworking Contest
      • Halloween Contest 2018

        Halloween Contest 2018
      • Audio Contest 2018

        Audio Contest 2018

      4 Discussions

      0
      None
      ccremeans

      6 years ago on Introduction

      I am going to universal studios in a few weeks I will have to make this for sure

      0
      None
      l8nite

      8 years ago on Introduction

      This is one of those "slap yourself in the forehead, why didn't I ever think of that kind of idea" this would be handy in a lot of situations...

      1 reply