Rubber Band - Earring Holder

2,765

77

12

About: Bojarski

Make a quick and pretty holder for your (stud) earrings. This easy and cheap project makes a perfect Valentines gift or it could even be a nice birthday present.

Step 1: Materials

You will need:
- Rubber bands (can look prettier with colourful rubber bands )
- A (squared) box i.e. box with edges otherwise the bands will not hold

Step 2: Putting the Bands

Stretch the bands and put them around the box with no space between the bands. (pic. 1)
You want to place the bands on one side of the box only so you can put the securing pieces inside. (pic. 2)
Place the bands on top of each other on the backside of the box. This way the box will elevate and the securing pieces will roll down and they will not be placed under the rubber bands making it difficult to reach for them. (pic. 3 & 4)

Step 3: Finish

Put the earring through the rubber bands which will hold it in place and the securing piece in the box. Now you are done!

Rubber Bands Challenge

First Prize in the
Rubber Bands Challenge

Share

    Recommendations

    • Paper Contest

      Paper Contest
    • Trash to Treasure

      Trash to Treasure
    • Tape Contest

      Tape Contest

    12 Discussions

    0
    None
    BojarskiGinko Balboa

    Reply 4 years ago

    Thanks, of course. maybe you can share a picture with the i made it comment :-)

    0
    None
    BojarskiBeachsideHank

    Reply 4 years ago on Introduction

    Oh thank you. You can perhaps make one for rings as well. If you use a more shallow box (lid maybe?) and stretch the rubber bands even more. :)