Wire is a cool looking rubiks cube trick for beginers. It only take about ten minutes to learn and another five to memorize. If you already know the side names you can do it even faster!
Step 1: Materials
All you will need for this project is a rubiks cube. I recommend the cyclone speed cube. Here is a link to buy one on amazon https://www.amazon.com/Cyclone-Boys-FeiWu-Stickerless-Speed/dp/B00HYMC33O/ref=sr_1_3?ie=UTF8&qid=1467056301&sr=8-3&keywords=cyclone+rubiks+cube
Step 2: Rotations and Memorization
For this trick you start by doing another trick called slashes. You can check my other instructable to learn that one. After you complete that the rest is really easy.
Turn : R2 B2 L2 R2 B2 L2
If you dont know what the means at all dont worry, just go to this link. https://rubiks.com/uploads/blog_entries/8.png
Step 3: Finished
When your done , the end result should be a jagged line on four of the six sides. Thanks for reading if you have any questions please leave me a comment