Introduction: Rustic Box With Jigsaw Cut Joints

I wanted to see if I could make box joints using a jigsaw, to find out I produced a video making the joints for a Rustic Pallet wood box.

To make a good fit box joint you need to cut one or two fingers on piece then trace that gap onto the a joining piece then cut up to but not over the marked line, then do a test fit then shave a bit more off. Repeat this process until you get a nice tight fitting joint.

This joint is perfect if you have limited tools and also can add to the rustic effect of the project

if you enjoy my articles and videos please follow me on Instructables and subscribe to my YouTube channel

here --> http://www.youtube.com/subscription_center?add_use...