S-GDSP: K'nex Mag Fed Disk Shooter Pistol INSTRUCTIONS




About: I lk k'nex. d u lk k'nex?
Here it is, and hopefully a comeback from my first *ahem* crappy *ahem* pistol (which was removed- it was an embarrassment.). It shoots small wheels with very good power, and could be modified to take medium wheels. The mag holds 8 wheels, however if you do not want to cut your pieces, it will hold only 4.
Pros & Cons time!

There are no other guns on Instructables like it.
good power
brilliant range
Good as a sidearm

ugly looking
sometimes inaccurate (shoots up over target)

Here's a video to show you guys how this bad boy performs!

So, what do you guys think? Comment below!

Step 1: Magazine

'YOU TELL US TO MAKE THE MAG FIRST?!?! ARE YOU INSANE!?!?' is what you are probably thinking. And i reply 'Yes, yes i am.'

Pic 1: make 3
pic 2: make 2
pic 3: put it together with blue rods
pic 4: another view
pic 5: add two cut blue rods, one yellow rod and a a snowflake connector like this
pic 6: another view
pic 7: make this.
pic 8: make this.


Step 2: Handle

'WHAT!?!?! THE HANDLE TOO!' ' Yes, the handle too.'

Pic 1: make 1
pic 2: make 1
pic 3: make 1
pic 4: another view
pic 5: add here
pic 6: add first part.

Step 3: Body & Assembly

'Ok, why are we doing the body last?' I hear you cry. 'BECAUSE I'M MENTAL!!!!'

pic 1: make 1
pic 2: make 1
pic 3: make 7 of each
pic 4: add the parts from the previous picture
pic 5: add the first part
pic 6: add these pieces on each side
pic 7: attach the handle
pic 8: make sure you add these y-connectors
pic 9: attach the mag
pic 10: put the mag pin in
pic 11: add the mag push


Step 4: Rubber Bands & Firing Pin

now, this actually makes sense!
pic 1: make the firing pin
pic 2: put it in here
pic 3: make 3 of these
pic 4: add here
pic 5: put a rubber band here...
pic 6: ... and here.


Step 5: Loading & Shooting

yaaaay! you have finished the build! now, learn how to load.

pic 1: remove mag lock pin
pic 2: put wheels on
pic 3: pivot mag back up, replace the mag lock pin, and hook the band from the mag push on top of the barrel
pul back firing pin, aim and shoot. repeat.

soo, what do you guys think? Comment below!, Also, PM me a picture of yours for it to be featured on the next page!

Spazgadget         (follow me!)

Rifle version w/ removable mag!

*(soon = whenever i finish my IAC cannon :3)

Step 6: YOUR Versions!

Pictures of YOUR versions will be posted here! PM them to me!



    • Pie Contest

      Pie Contest
    • Pocket Sized Contest

      Pocket Sized Contest
    • Trash to Treasure

      Trash to Treasure

    10 Discussions


    7 years ago on Introduction

    Very cool, NIce job! I am thinking about building this. To me, it seems very reminiscent of the nerf vortex vigilon.

    5 replies

    Reply 7 years ago on Introduction

    Thank you very much, friend! I must agree, it does look like the new vortex, however was perfecting this months before I had even heard of the now Nerf guns. If you do build, I hope it is good!


    Reply 7 years ago on Introduction

    Thank you for the follow! It means a lot to me to have somebody as EPIC as you following a noob like me! Can you also post it if you mod it? that would be nice =)


    Reply 7 years ago on Introduction

    Ahh, It's no problem :)

    I did build it, and almost made a different gun there's so many mods. It still looks almost the same, though. The only real problem I'm having right now is that I have strong elastics on the gun, and they are kind of wrecking the wheels when it shoots them. It should be able to be fixed with a sharpened black rod.


    Reply 7 years ago on Introduction

    Hmm... did you remember to put the yellow connector on the end of the firing pin? that did it for me.

    the orange connectors at the back keep breaking when the ram rod hits them? what do i do