SINE WAVE INVERTER USING PIC MICROCONTROLLER

Introduction:

In this project we discuss about “Pure Sine Wave Inverter”. This is a basic need of our daily life because normally used inverter in our daily life this is square wave output. We make pure sine wave inverter for better future and save our home appliances and good efficiency of inverter. In this pure sine wave inverter we use PIC Microcontroller (PIC 16F887) to make an efficient and low cost inverter. We also use a filter capacitor at transformer output for removing noise. We also checked pure Sine wave output on Oscilloscope.

Construction of Induction Motor

Step 1: Components List

1. Battery

12v

2. PIC Microcontroller

3. Regulator 7805

4. Capacitor

5. Diode

6. Resistor

7. LED

8. Level Converter (5v to 12v)

9. High Power FET Module

10. Step UP Transformer (12v to 220v)

11. AC filter Capacitor

12. AC Load (Bulb)

13. Soldering Iron

14. Solder Wire

15. Wiring Wire

Step 2: Video

Share

    Recommendations

    • Sweet Treats Challenge

      Sweet Treats Challenge
    • Paper Contest

      Paper Contest
    • Warm and Fuzzy Contest

      Warm and Fuzzy Contest

    Discussions

    0
    None
    AbdelE6

    6 months ago

    Please if you can show me the circuit diagram of the h bridge you used