STEMFIE Construction Set Sample Parts

Introduction: STEMFIE Construction Set Sample Parts

About: The 3D-printable construction set at http://stemfie.org

STEMFIE is a 3D-printable construction set you can download and make for free!

As a preview, this sample file contains the following standard parts in the STEMFIE mechanical echo system.

  • Shoulder screw (SPN-SSC-0042)
  • Cam-locking pin (SPN-PIN-0042)
  • Free washer (SPN-WSR-0038)
  • Fixed washer (SPN-WSR-0001)
  • Threaded nut (SPN-NUT-0001)
  • Cam-locking nut (SPN-NUT-0018)
  • Brace plate (SPN-BRC-0003)
  • URL sign

This print typically takes 30 minutes to make on a filament-based 3D printer, consuming little material (less than two metres).

Depending on the calibration of your 3D printer, the parts should fit snuggly. The threaded nut should rotate freely onto the shoulder-screw, and the cam-locking nut attaches to the tip of the cam-locking pin, by turning 90 degrees.

Stay tuned at stemfie.org/news to learn more about this project and be the first to know when new files are released in the future.

#Stemfie3D #3Dprinting #ConstructionSet #3Dprintable #Toys

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Be the First to Share

    Recommendations

    • Clocks Contest

      Clocks Contest
    • Trash to Treasure Contest

      Trash to Treasure Contest
    • Heart Contest

      Heart Contest

    Discussions