Seed Starter Pots for Free!

Introduction: Seed Starter Pots for Free!

This instructable is my entry for the green design contest. In this instructable I'll show you how to create two seed starting pots by up-cycling a water bottle. Most of us use these kind of water bottles quite often and toss them without thinking even for a second that these can be reused. It is my hope that many people will utilize this idea and repurpose these kinds of bottles for starting vegetable gardens.

Step 1: Let's Begin !

I started by removing the sticker from the outside of the bottle and rinsing it out with water. Next you need to cut the bottle into three sections, two pots and one base to help hold up one of the pots. You can see where the two cuts need to made by looking at the labeled picture. The ripples in the bottle can be used as a guide to help keep your cuts straight.You have now created two seed starter pots from one bottle! Enjoy! Save your bottles and try this in the next seed planting season.

Green Design Contest

Participated in the
Green Design Contest

Be the First to Share

    Recommendations

    • Puzzles Speed Challenge

      Puzzles Speed Challenge
    • Secret Compartment Challenge

      Secret Compartment Challenge
    • Lighting Challenge

      Lighting Challenge

    3 Discussions

    0
    mmays4
    mmays4

    5 years ago

    I just used this method and found another use for the top , using yarn (what I had available) I hung from a nail on the balcony

    14, 14:42.jpg

    What great little seed starters! And then you can recycle the bottle when you plant the seeds in the ground!

    0
    Sajjad Ahmed
    Sajjad Ahmed

    Reply 6 years ago

    Thanks, I'm glad you liked this idea!