Servicing a Shower Head Heater!

Introduction: Servicing a Shower Head Heater!

About: Update 12 September 2017: A very special thanks to Sam Elder, a manager here at Instructables, who tracked down the cause of my lost publications and fixed the issue. Take a bow Sam!

My shower head heater has been giving pitiful shower of water due to clogged holes. Here is how I fixed that.

Step 1: Unscrew the Head.

Once the head is off, time to get to work.

Step 2: Disassembly of the Head.

Using a butter knife ?, I unscrewed the cover. I rinsed out the entire assembly and separated all the parts.

Step 3: Inspection.

Holding up the cover to the light, so many holes are clogged!

Step 4: Cleaning.

Using a safety pin I drilled into all the holes.

Step 5: Checking.

Ahhhhh! All the holes are letting light through! ?

Step 6: Reinstallation and Completion!

Screwing back on the cleaned head... Turning on the shower... Full spray now! ?happy shower days ahead! ?

Share

    Recommendations

    • Water Contest

      Water Contest
    • Metalworking Contest

      Metalworking Contest
    • Fix It! Contest

      Fix It! Contest

    Discussions