Introduction: Sew Your Own Pika-pillow
Are you a pokemon fanatic? Do you want to do a sewing project but don't have a lot of time?
Here's a simple pillow that won't take any longer than an hour! (As a bonus it looks really cute :D)
Let's get our supplies.
A yellow pillow
A needle and threads
A fabric marker (This is for the mouth. If you want you can also just stitch a mouth on.)
Glue (I used a glue stick)
Step 1: Print Out a Template
Print out this picture and cut out the cheeks, eyes, nose and mouth. Arrange them on your pillow and see where you want the pieces to go. This will help you position the felt pieces later on.
Step 2: Cheeks
Cut out 2 red circles. These will be Pikachu's cheeks. Put these aside.
Step 3: Eyes
Next, cut out two black circles slightly larger than the cheeks. Cut and glue two small white circles and glue them to the black circles to make Pikachu's eyes.
Step 4: Nose
Cut out a small, rounded triangle for the nose. In the photo I show the eyes to show the size of the nose compared to the rest of the pieces.
Step 5: Putting It All Together
Start by sewing on the cheeks, then add the nose and eyes. We're almost done!
Step 6: Mouth
With the fabric marker, draw a mouth. If you like, you can draw an open mouth!
Step 7: And... Finished!
There you have it! Your very own Pika-pillow! You can catch it if you want. I released mine into the wild.
Hope you enjoyed this instructable!
Participated in the
1 Hour Challenge