Introduction: Shooting Box
This is a shooting box that can take beautiful photos
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Things to Prepare
- White paper(Kent paper)
- double sided tape
- gum tape
- cutter mat
- masking tape
Step 2: Cut Cardboard
Cut the cardboard into 300mm × 300mm squares.
I will make four of them.
Step 3: Cut White Paper
Similarly cut the White paper into 300 × 300 squares.
I will make two of this.
I will also make one piece of 300 × 540.
Step 4: Paste
Attach 300 × 300 White paper to cardboard with double-sided tape.
Step 5: Docking
Lay them in the same order as the photos and stop them with gum tape from the back.
Step 6: Paste
As in the photo, paste 300 × 540 White paper on cardboard.
Step 7: Assembly
Make it box-shaped and stop with masking tape.
Step 8: Done!
Let's take a picture!