Shotgun Bullets, Can Be Used in Every Knex Gun! (mod)

1,726

3

54

About: This part used to be full of crap but I finally deleted all of it. I'm Tigernod. I'm a student from North Brabant. You are all awesome and I love you. <3

Intro: Shotgun Bullets, Can Be Used in Every Knex Gun! (mod)

I was a working on the Heavy support splodie rifle, and halfway there I found out that this gun could alos support other types of ammo! So I kinda played with modefied oodammo and then I though of an instructible I sa a few months ago on shotgun ammo. I searched for shotgun rounds but it didn't gave me any results. I think the guy that made it removed the bullets. So I though "hey,I know how these things work, so why don't I go and make em?" So I made two differnt versions; one for normal knex guns and one for Infinnion's HSSR. I do think however it may need one little improvement, I'll post that later. For now, lets get building!

PS: Credit to the maker of shotgun ammo and Darth trainman for the idea of priming the bullets.

Step 1: Parts List

These are all the parts you need for the normal bullet;

1 Yellow rod
1 Red rod
1 Orange connector
1 Black thingie
Up to 24 blue spacers. More will increse the number of shrapnel but decrease the power.

For the HSSR version you need:

1 Green rod
1 Red rod
1 Orange connector
1 Black thingie
Up to 24 blue spacers. More will increse the number of shrapnel but decrease the power.


Allright, you know what you're doing. For great justice.

Step 2: Normal Bullets

Follow the Images and this small description.

1 Make this.
2 Add some rings. Please notice this is the HSSR version.
3 Add this, and your'e done! To fire it, go to the next step.

Step 3: Fire in the Hole!

First, put the yellow rod side into the barrel. Remove the black thingie and place it as in the picture. Pull back your bolts, take aim, and get ready to pump some spacers in someone's face!

Step 4: HSSR Version

Well, not really a step, just make the normal one and replace the yellow rod with a green.

Allright, hope you like it, plz comment!

Share

    Recommendations

    • Electronics Tips & Tricks Challenge

      Electronics Tips & Tricks Challenge
    • Audio Contest 2018

      Audio Contest 2018
    • Optics Contest

      Optics Contest

    54 Discussions

    I think they can be used in both, but I'm not sure for I haven't tried them out yet on slingshots. I an afraid the rod will fly out of control and hit the target with the wrong side, but as I said before I am not sure about that. What I do know is that it works in all k'nex guns that use a bolt, exept for the ones with fake barrels.

    0
    None
    knex_mepalmTigerNod

    Reply 9 years ago on Introduction

    lol i can do better than this, although it is old but i will be posting tommorrow or soon... it works on anygun that will directly shoot only a particular spot aka through a barrel, made to meet the requirements of the ZLG and has a shell with shot. No pictures...

    0
    None
    TigerNodknex_mepalm

    Reply 8 years ago on Introduction

    Hey Mitchell, I know this is a late reply, but I suppose you completely forgot about this project. Can you maybe try this again? I'm sure this new type of ammunition would be awesome!

    0
    None
    knex_mepalmTigerNod

    Reply 8 years ago on Introduction

    No I have been making this like for the last who knows when. I am coming back to instructables...no notice, lolz. Anyway, there was a slideshow/video somewhere about some ammo that was made of paper that I posted. If you removed the tape it would burst out. Anyway, working on it, if it takes this long, it probably means it cannot be dont, reply in a week maybe?

    0
    None
    TigerNodAn Villain

    Reply 9 years ago on Introduction

    No, you don't seem to understand what this is for. This is not meant to be used in a shotgun, but to make a normal gun a shotgun.

    0
    None
    An VillainTigerNod

    Reply 9 years ago on Introduction

    i know what they are for, they are muzzle-loaded grenades that explode on impact or in the air to fire a spray of pieces at the target.

    0
    None
    TigerNodAn Villain

    Reply 9 years ago on Introduction

    Yes. I think they are much more devastating if you fire 6 at a time, right? Let me think... 24 x 6 =... 144 spacers in one shot!

    0
    None
    An VillainTigerNod

    Reply 9 years ago on Introduction

    i took the BR-V1 turret and made it into an extended GG and it fired 24X8=192 spacers and 8 rods and 8 Y clips.

    0
    None
    An VillainTigerNod

    Reply 9 years ago on Introduction

    maybe, remove the front-reinforcer piece from the vivisector and load these in, 64 barrels, or make a counter-rotating gattling gun out of BR-36 turrets.

    0
    None
    TigerNodAn Villain

    Reply 9 years ago on Introduction

    With the Vivisector, that would mean... 1536 spacers!!! But with the more compact BR it gets even better... 2 x 36 x 24 = 1728 SPACERS!!!!! That would be the ultimate shotgun!