Simple Final Fantasy Sword

About: Mom (left) Adam (right)

Intro: Simple Final Fantasy Sword

Step 1: Materials

You will need cardboard 3'x2' you can cut to fit I put the cough pic because it's roughly how big the cardboard is You need a big stick that is straight and the cardboard is 3/4 of the sticks size And you need a hot glue gun and hot glue

Step 2: Cutting the Cardboard

You have to cut it so it will wrap around the sword and look like a blade so like the blade x2 put backwards it's kind of hard to explain that's why they have pics :|

Step 3: Hot Glueing

Make a mark on the stick where the handle starts (RED ARROW) then hot glue a line of hot glue up and down the big stick than stick it to the middle of one half Of the cardboard than fold over the cardboard and do it the same on the other side You should have so far the second picture next hot glue together what I'm pointing at in the 3rd pic

Step 4: Spraypaint

My handle is probably way too long but you should probably spray-paint it silver or chrome I think that would look cool but the world is your oyster imagenize I took some shots on google images just to give you some ideas

Share

    Recommendations

    • Electronics Tips & Tricks Challenge

      Electronics Tips & Tricks Challenge
    • Optics Contest

      Optics Contest
    • Audio Contest 2018

      Audio Contest 2018

    2 Discussions

    0
    None
    jadynbig

    2 years ago

    we should all know that

    0
    None
    rodimus ion

    4 years ago on Introduction

    the pic u have is of clouds FUSION SWORD the buster sword belonged to clouds friend zack