Simple Lego Car

These instructions will help you create a simple Lego car in just 5 - 10 minutes!

Required Materials:
4 - Wheels
4 - Tires
1 - Grey 4 x 10 flat thin board
2 - Red 1 x 2
2 - Red 1 x 3
2 - Red 1 x 4
1 - Red 2 x 2
2 - Red 2 x 2 wedge
2 - Blue 1 x 3
1 - Yellow 2 x 4 thin
1 - Clear 2 x 2 wedge
1 - Windshield 
2 - Windows
2 - Black 1 x 4 axles
1 - White/Black Steering wheel
1 - Lego person

Step 1: Wheels

New pieces:
4 -  wheels
4 -  tires

Place the wheels in to each of the tires

Step 2: Axles

New pieces:
2 - axles

Place each of the wheels on to the axles.

Step 3:

New pieces:
1 - grey 4 x 10 thin 

Place the axles on to the ends of the 4 x 10 thin grey piece.

Step 4: Body 1

New pieces:
2 - Red 1 x 4
2 - Red 1 x 2
2 - Red 2 x 2 wedge

Place the pieces on the board as shown.

Step 5: Windows

New pieces:
2 - Windows
2 - Windshield

Place the windshield above the wedges, and the windows on each side of it.

Step 6: Steering Wheel

New pieces:
1 - steering wheel

Insert the steering wheel below the windshield.

Step 7: Sides

New pieces:
2 - Red 1 x 3
2 - Blue 1 x 3

Make the two pieces as show, they will be used in Step 8.

Step 8: Assemble Sides

Place the pieces you made in the previous step on to the body, behind each of the windows.

Step 9: Rear Piece Assembly

New Pieces:
1 - Clear 1 x 2
1 - Clear 2 x 2 Wedge
1 - Red 2 x 2

Assemble as show in preparation for the next step

Step 10: Rear Assembly

Place the piece you just made on to the rear of the car, with the wedge section facing inward.

Step 11:

New Pieces:
1 - thin yellow 2 x 4

Place the yellow piece on the front of the car.

Step 12: Driver

New Pieces:
1 - Lego Person

Place the driver in the divers seat.

Step 13: Finshed

Your car is complete!