Simple Skateboard

This is a simple skateboard

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Step 1: Make the Basic Board of Skateboard Board

The plate comes in four sizes:

4×10/45/1 boards with a 90 degree curve on one corner (corner piece)

2×90/20/1 boards (sides)

2×20/45/1 boards (heads)

1×90/20/1 board (body)

Step 2: Step 2: Assemble the Board

First combine into left, middle and right three large board surface, make left, right and two board warped about 10°, combine into skateboard surface

Step 3: Step 3: Make the Wheels

Wheel specification: radius 5, wall thickness 5, width 4.

Make four identical wheels

Step 4: Step 4: Make the T-axis

Specification: the lower axis is a cylinder with a radius of 2.5 and a length of 34. It is cut into a prism with a triangular pyramid. At last, a cuboid 30 long, 7 wide and 1 high is made

Step 5: Step 5: Combine the T Axis With the Wheel As a Whole

combine the T axis with the wheel as a whole

Step 6: Step 6: Combine the Board and the Assembly

combine the board and the assembly

Step 7: Step 7: Make the Words Speed and Cool

Make it suitable size and 0.5 height, and print it on the surface of slide plate

Step 8: Step 8: Make the Star Symbol and the "G" Character

Make it suitable size, height 0.5, printed on the surface of the skateboard

Skateboard Contest

Participated in the
Skateboard Contest

Be the First to Share

    Recommendations

    • Make it Glow Contest

      Make it Glow Contest
    • STEM Contest

      STEM Contest
    • Furniture Contest

      Furniture Contest

    Discussions