Single Loom Bracelet

Introduction: Single Loom Bracelet

I will be showing you how to make a single loom bracelet. One that is from rainbow loom. It is pretty simple actually. You can use your fingers, or a loom. I find it easier, and faster to use my fingers though.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Step 1: Supplies

Ok. So here are the things that you will need:

1. As many colors that you want for the bands

2. A loom... or your fingers:)

3. A clip to clip the bracelet together at the end

4. These instructions on how to make the bracelet

Step 2: Step 2: Starting the Bracelet

First you need to get your clip. Then get one color and attach it to the clip. After that you need to loop the second band through the first band (See picture) Then get another band and loop it through the second band. Keep doing that until the bracelet fits your wrist. If you are making this for someone, it usually takes 20 bands for someone 10 and under. 20-25 bands for someone 11-20, and anyone over that age is probably 25-30 bands.

Step 3: Step 3: Finished Product

The bracelet in the picture above should be similar to what your bracelet looks like when it is done! If not, look back at the steps, and see if you did anything wrong. I hope you like your (or whoever you made the bracelet for) new bracelet!!!

Be the First to Share


    • Fandom Contest

      Fandom Contest
    • Jewelry Challenge

      Jewelry Challenge
    • Backyard Contest

      Backyard Contest

    2 Discussions