Snow Man

117

This snow man is developed in the fusion 360 of autodesk.

I have used model and rendering environment of fusion 360.

I have used red glossy colors for hands.

I have used white glossy colors for head and the body.

I have used green glossy colors for feet.

I have used black glossy color to the nose.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Smaller Sphere.

In this step I am in the model work space of fusion 360.

In this step I have made smaller sphere.

Step 2:

In this step I am in the model work space of fusion 360.

Then i have constructed an offset plane.

Then I have made a larger sphere.

Step 3: Sketch for Nose.

In this step I am in the model work space of fusion 360.

Then I have made a line by taking right side plane.

Then i have clicked stop sketch.

Step 4: Loft for Nose.

In this step I am in the model work space of fusion 360.

Then I have constructed two planes at the two ends of previously drawn

line.

Then I have drawn a larger circle near the body of snow man.

Then I have drawn a smaller circle at the other plane.

Then I have applied loft operation to the two circles drawn.

Step 5: Eyes of Snow Man.

In this step I am in the model work space of fusion 360.

Then I have drawn two circles on for eyes.

Then I have extruded the two drawn circles.

Extrusion in this case results in cutting operation.

Step 6: Hands of Snow Man.

In this step i am in the model work space of fusion 360.

I have taken front plane.

Then I have drawn a line .

Then I have constructed two planes at the ends of lines.

Then I have drawn a circle at the end of line which is close to body.

Then I have sweep that circle along the line.

Then I have made a sphere at the other end of line , which is farther from body.

Then I have drawn other hand by applying mirror operation on the first hand.

Step 7: Legs of Snow Man.

In this step I am in the model work space of fusion 360.

Then I have drawn a line by taking front plane.

Then I have drawn two planes at the two ends of line.

Then I have drawn a circle on a plane which is on , one of the ends of line,

but the end is nearer to body.

Then i have extruded the circle by , taking slight taper.

Then I have drawn another circle at the second end of line.

This circle is larger than the previous one.

Then I have extruded the circle up to certain height.

Then I have made other leg by applying the mirror operation to the previous leg.

Step 8: Color to Snow Man.

In this step I am in the render work space of fusion 360.

Then I have applied white glossy color to the body of snow man.

Then I have applied red glossy color to hands.

Then I have applied green glossy colors to feet.

Then I have applied black glossy color to the nose of snow man.

In this way our snow man is completed. Participated in the
Design For Kids Challenge