Soldering Iron Holder With Fume Extractor

Introduction: Soldering Iron Holder With Fume Extractor

more info : http://legwinskij.blogspot.com/2011/08/soldering-iron-holder-with-fume.html

Be the First to Share

    Recommendations

    • Pocket-Sized Speed Challenge

      Pocket-Sized Speed Challenge
    • Audio Challenge 2020

      Audio Challenge 2020
    • Maps Challenge

      Maps Challenge

    6 Discussions

    0
    Crapxxas19
    Crapxxas19

    7 years ago on Introduction

    I suggest using something like copper or brass wool instead of the steel wool because i have messed up iron tips using steel wool and the brass or copper will not be strong enough to scratch up a tip.

    Very interested in your filter. I’m looking at building a similar cabinet and would love to hear about your experience. There has been a lot of talk regarding this subject.It is very famous and almost all important and well known people are in the management committee. I’m looking at building a similar cabinet and would love to hear about your experience. There has been a lot of talk regarding this subject.