Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Gather Materials
make four corners using the L connectors (with pvc pipe)
Get the materials needed below to make this spool holder.
- 3 wooden dowels at 12 inches each
- 2 X connectors
- 4 T connectors
- 6 L Connectors
- 19 Custom pvc pipes
Step 2: Make Four Corners Using the L Connectors (with Pvc Pipe)
Step 3: Attach the Four T Connectors(will Hold 2 of the Dowels) to the Four L Connectors (2 Will Hold a Dowel) Placing Custom Pvc Pipes in Between.
Step 4: Between the First & Second T Connectors on Either Side and the First & Second L Connectors on Either Side Connect Two X Connectors.
Step 5: Now With the Connectors in Position Place Each Dowel in Place One by One.
Step 6: At the Top Where the L Connectors Are and Place PVC Pipes With an Additional Two L Connectors.
Step 7: To Cap the Open Ended Pipes With Two L Connectors Facing in and an Additional PVC Pipe That Connects the Two.
Step 8: Your Design Is Complete and Should Look Like This.
Indoor Lighting Contest
Make It Fly Challenge