Standing Drift Trike

5,940

22

7

About: I'm a high school student who loves making and hacking stuff!

Are you sick and tired of your regular bicycle? You'll never get tired of this one. It is probably the most versatile drift trike ever. See videos below!

WARNING!!!
THIS BIKE HACK WILL DRAW A TON OF ATTENTION!!!

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Watch the Videos.

Step 2: Remove Everything That Has to Do With the Chain Drive.

Remove rear wheel, cranks, etc. 

Step 3: Install the Rear Axle.

I got the axle from an old Power Wheels kiddie electric quad bike. Make sure you tighten the bolts really well!  If you can weld, weld the axle on instead of bolting it.  

Step 4: Put on the Rear Wheels.

Step 5: Add Reflectors (optional).

Step 6: Optional Compartment.

You could store and extra inner tube for the front tire ... or some chocolate, as long as it's not a hot day!

Spring's Coming Contest

Participated in the
Spring's Coming Contest

Be the First to Share

    Recommendations

    • Furniture Contest

      Furniture Contest
    • Reuse Contest

      Reuse Contest
    • Made with Math Contest

      Made with Math Contest

    7 Discussions

    0
    None
    XardoX

    11 months ago

    no videos availables :/

    0
    None
    Databanks

    3 years ago

    Wonder how it'd go with the regular seat still on. Good reuse of an old bike and drifting looks fun

    2 replies
    0
    None
    BikeHackerDatabanks

    Reply 3 years ago

    I actually tried that on another drift trike project and it worked really well for going down hill. You had much more control over it than with the standard drift trike seat setup.

    0
    None
    DatabanksBikeHacker

    Reply 3 years ago

    Neat. I was wondering because of the higher centre of gravity. But that also means you can shift the weight around more, I guess

    0
    None
    tokuta

    5 years ago on Introduction

    im going tio use you axle mounting idea because my shop teacher wont let me weld it on.

    1 reply