Introduction: Stool From Old Pouf.
I'v found old and ugly pouf and then i'v got an idea: why not recycling it :)
So....... lets do it !!!
Step 1: Step 1: Preparing Materials
- old spool ( from the trash)
square wooden peg ( remains from the old project )
- miter saw
I've cut the pin for 3 pieces ... cm at an angle of ... degrees.
Next separated the pin from the spool ( I was need only one round top )
Step 2: Step 2: Legs of the Stool
- stuffs from step 1 :)
- wood glue
- white paint
I've glued and screwed legs to the round bottom.
In the next step construction was painted on white ( i didn't sanding peg so it was necessary painting it 3 times )
Step 3: Step 3: Binding the Poof
- two peaces of material ( light grey and dark grey - in my case )
- old poof
- sewing machine
Unfortunately i don't have a picture for sewing process :(
But!!! I was measuring and cut the fabric, and then (with my "super sewing powers" ) i was sewed it together.
The cover came a bit too big for me. But that does not matter. It will be easier to dress poof up :)
Step 4: Step 4: "Dressing" the Poof
I've put a poof on the legs of the stool, I pulled the fabric and nailed it with a stapler
Almost DONE :)
Step 5: Step 5: Decoraying
- jute rope
- glue gun
I've cut the rope to the right dimension and glued it on joining point ( between legs and material border )
And that's all !!!
Step 6: Step 6: Grand FINAL :)
Enjoy your brand new STOOL !