Strong Knex Gun

Introduction: Strong Knex Gun

This is a very strong gun and is capable of shooting 60+ feet with a couple of good sized rubber and. It can hold 7 shots in the magazine.
WARNING: DO NOT shoot it at ANYONE!!! It can leave behind bruises.

Step 1: Barrel

This will be your barrel.

Step 2: Magezine

This is the magazine.

Step 3: Trigger

this is a block trigger.

Step 4: Firing Pin

This will be the firing pin for the gun.

Step 5: Body

This will be the main part of the gun.

Step 6: Assembley

This is how to put the gun together.

Be the First to Share

    Recommendations

    • Mason Jar Speed Challenge

      Mason Jar Speed Challenge
    • Pumpkin Challenge

      Pumpkin Challenge
    • Bikes Challenge

      Bikes Challenge

    28 Discussions

    0
    Darkness94
    Darkness94

    11 years ago on Step 3

    That orange thing is hard to connect.

    0
    blooshga11
    blooshga11

    11 years ago on Step 5

    what type of stick do i put where the clip goes to hold the orange peices

    0
    ry guy
    ry guy

    Reply 11 years ago on Step 5

    a yellow stick

    0
    ry guy
    ry guy

    12 years ago on Introduction

    these are the other pictures of my gun

    100_2953.JPG100_2954.JPG100_2955.JPG100_2956.JPG
    0
    Bernadette263
    Bernadette263

    12 years ago on Introduction

    that thingi mahoo is awsome because it has a thingymagic on the whatsafoo

    0
    ry guy
    ry guy

    Reply 12 years ago on Introduction

    smidge, do you have any ideas for mods on my gun?

    0
    ry guy
    ry guy

    Reply 12 years ago on Introduction

    the barrel is bent due to the tension of the rubber bands, however the shot still makes it through.