Make Your Own Stuffed Hobbes (Free Pattern!)

638,629

1,457

325

About: I got an old sewing machine when I was just a kid, and I've been hooked on making stuff ever since. My name is Sam and I'm a community manager here at Instructables.

The comic strip Calvin and Hobbes was wildly popular through its run in the papers. Like most people, I've always been a fan, and now my kids are as well. For Christmas a few years ago, I thought a stuffed Hobbes doll would make a great gift for one of my sons.

The artist of the strip, Bill Watterson, famously refused to allow his characters to be licensed and capitalize on their popularity, feeling that doing so would undermine the integrity of the strip. Despite obvious interest, Calvin and Hobbes merchandise was never available. Thankfully, you can buy all the comics in book form. I recommend picking up the box set if you don't already have it: Calvin and Hobbes box set on Amazon

Since you cannot buy a Hobbes doll, I figured I'd make my own!

For anyone interested in duplicating this Hobbes doll, I'm sharing the pattern I came up with for free. The pattern produces a Hobbes that is about 16 inches tall.

The pattern shared here is for personal, non-commercial use only.

My son loves his Hobbes and has been happily dragging him around for years. If you make one, please post a photo in the comments!

Step 1: Pattern

I spent a while digging through my Calvin and Hobbes books studying the Hobbes character when he was in the stuffed-toy form.

Early versions of Hobbes were very cartoony, and things like the shape of the nose and the number and placement of stripes were not always consistent. His proportions also appear to have changed slightly over the years. Later versions were crisp, clean and very consistent in the features. I based my Hobbes doll off of pictures that appear in the later strips.

To create the pattern, I broke the doll down into separate basic shapes. After some trial and error, I had a pattern that yielded all the needed body parts that fit together to my liking.

This pattern requires creating and stuffing all of the different body parts separately, hand stitching them all in place, and then hand stitching all of the stripes in place individually.

If that wasn't completely clear, this project requires a ton of hand stitching. You've been warned!

Begin by printing out my homemade Hobbes pattern, preferably on stiff paper like card stock.

You will need about 1/3 yard of orange fleece, some little bits of black, and a couple small pieces of white. You will also need some polyester stuffing, poly stuffing beads if you want, two black 3/4" plastic buttons, and some thin black cording or yarn.

Step 2: Body

Print and cut out all the pattern pieces, and tape the two pieces together that form the pattern piece for the body.

Use the pattern to cut out all the various shapes from fleece, according to the colors and number of pieces needed as indicated on the pattern.

Sew the white belly piece to one of the orange body pieces. I did mine on the machine with a zig-zag stitch, although now that the doll is finished I wish I had sewn it on by hand so it matched all the other exterior stitching on the doll.

With the white belly facing in, sew the two body pieces together along the longer sides only.

Sew the round orange bottom piece into the bigger end of the body section.

Turn the completed body right-side-out, and fill it with polyester stuffing, leaving the stuffing about 1/2" from the top. Hand stitch the top of the body closed as shown in the last photo.

I filled my Hobbes doll pretty firmly with stuffing, figuring it would break down and become more floppy over time. However firmly you choose to fill your doll, just make sure you do it consistently in all the different body parts. I didn't do it on anything but the tail, but you could add stuffing beads to the ends of various body parts to add weight if desired.

As far as seam allowances, I usually just line my material up with the right edge of the presser foot on my machine, which is about 1/4".

Step 3: Arms and Legs

Sew the white ends onto each arm and leg piece as shown in the photos.

I tested out sewing some stripes onto a practice arm (at the point shown in the third photo), but I didn't like the way the machine-stitched stripes looked on the completed arm. I decided to complete the entire Hobbes doll without stripes and sew them all on by hand at the end. This proved incredibly tedious, but allowed for very precise sizing and placement of stripes, which I appreciated.

Please examine the last three photos carefully if you have any questions on how the rounded ends of the arms and legs are accomplished.

Turn the arms and legs right side out, and fill with stuffing. Do not sew them shut at this point.

Step 4: Ears

Sew both pairs of ear pieces together, and turn them right-side-out.

To get a nice curve to the ears, fold the bottom half of each ear in half and place a few hand stitches to hold them in place, as shown in the photos.

Step 5: Head

Sew all the pleats on both pieces of the head as shown in the photos and indicated on the pattern.

Before sewing the two head pieces together, sew the ears in place onto one of the head pieces, right side to right side, just outside of the top two pleats, as shown in the fifth photo. (The ears appear different because this was an earlier test piece, but the method is the same.)

Note that the pattern for the ear pieces is not round, but they will appear so once they are sewn into the head. I sewed the bottom 1/2-inch or so of each ear into the head . . . just a bit more than a typical seam allowance.

With the ears in place where you want them, sew the two halves of the head together, and turn right-side-out. Fill the head with stuffing, but do not sew it shut.

Step 6: Tail

Sew the tail pieces together in the same manner as the arms and legs, according to the pattern, and fill with stuffing. I added some stuffing beads to the end of the tail to add some weight so it would flop around.

Step 7: Attach Head to Body

To attach the head to the body, begin by folding in about 1/2" of the fabric at the bottom of the head, like in the second photo.

Use orange thread to hand stitch the head in place. Nice, tight slipstitches work best for this, as well as for attaching the arms, legs and tail to the body. Learn how to do the slipstitch right here. (Thank you jessyratfink.)

I didn't like the way the head looked after my first attempt (shown in the first photo), so I took it off and added more stuffing and then re-sewed it in place. The extra stuffing helped create a more defined transition from head to body, which I thought more closely matched the Hobbes doll as he appeared in the strip.

Step 8: Prep Arms for Attaching to Body

Use a needle and thread to nip and tuck the arms as shown to create a shape similar to what is shown here in the first three photos.

Examine photos 4 - 7 carefully to see the steps I took to achieve this shape. The completed arm should be about 5 inches long.

Step 9: Prep Legs for Attaching to Body

Sew the tops of the legs shut as shown in the photos.

I guess it's not completely necessary to do it this way, but I thought it was nice and tidy.

Step 10: Attach Arms and Legs to Body

Use a needle and thread to attach the arms and legs to the body as shown. A curved upholstery needle may make things a bit easier when you're working in the tight crevices where the arms and legs meet the body.

When the arms are attached, they should be positioned about 3/4" down from the head, and about 1/4" away from the white belly.

Disregard the muzzle showing in these photos. It was a first attempt which I wasn't happy with, so it was removed and replaced with a new one which is shown in the next step.

Step 11: Muzzle

Begin the muzzle by sewing all the pleats as indicated on the pattern piece.

I recommend hand stitching the nose and mouth in place before attaching the muzzle to the head. I used a simple whipstitch (thanks again jessy) to attach the nose to muzzle, and muzzle to head, as well as for attaching all the stripes later on.

The mouth was made with some thin black cording and was stitched in place with a heavier needle.

Stitch the muzzle in place, but leave the bottom inch or so open. Fill it with stuffing and then stitch it all the way closed.

Step 12: Eyes

I wanted to use buttons for the eyes, but I couldn't find any in the shape was looking for.

I ended up buying some simple black plastic buttons that were 3/4" in diameter, and used a sanding attachment on my Dremel to carefully sand them down to the oval shape seen in the photos.

You could sand them down by hand, but it's much quicker with a Dremel. Just be careful, work slowly, and don't sand off your finger tips.

Stitch the eyes in place, positioning them as shown in the photos.

Step 13: Stripes

The two bottom-most stripes on the both the arms and legs, and the five stripes on the tail are all made from 3/4" strips of fleece.

The upper-most stripes on the legs were made from strips that were about 1/2" wide.

All other stripes were custom made as I went along, but I've included them in the PDF pattern. (You're welcome!)

Hand stitching on all of the stripes is a tedious process, but it's rewarding each time you see a newly completed stripe and you're one step closer to a completed Hobbes.

In the pattern, I've numbered and labled all the stripes to help you know where to put them. Note that the first stripe below the neck stripe is number 1 in the pattern, and so on down his back. Note that depending on the placement of your arms and legs, you may need to make adjustments to the size and shape of the back stripes, mainly numbers 1, 2, and 6.

The tail is the one piece of the body I left off until the very end. It was easier to sew the stripes onto it first, and then attach it to the body after.

Take a close look at all of the photos for placement of the stripes.

Step 14: Accessories

No homemade Hobbes would be complete without at least a few accessories.

Through the strip, Hobbes is seen wearing a variety of different things. I made him a tie, a Calvinball mask with flag, and his classic red scarf. Maybe I'll get around to making him some other items as well when I get a chance. (A cool sombrero, perhaps?)

For anyone that decides to make this, I'd love to get some feedback on how it goes. Please let me know if there are any parts that need more clarification or detail.

My kids love it. I'm kind of nervous that they're going to destroy it, but I guess I could always fix it, or at least make a new one . . .

Let me know what you think, and if you make yourself a Hobbes doll please post a photo in the comments below!

Toy Challenge 2

Finalist in the
Toy Challenge 2

187 People Made This Project!

Recommendations

  • Faux-Real Contest

    Faux-Real Contest
  • PCB Contest

    PCB Contest
  • Warm and Fuzzy Contest

    Warm and Fuzzy Contest

325 Discussions

0
None
jywshum

Question 25 days ago on Step 5

Hi, i was wondering for the head, do I need to cut out all the pleats like you do for the muzzle? the pictures seem to indicate that they don't need to be cut out, but i would just like to make sure. thanks so much in advance!

Screen Shot 2018-12-22 at 10.28.48 PM.png
1 answer
0
None
seamsterjywshum

Answer 25 days ago

Hi there,
For those, I just folded the materials over and sewed little tiny darts - no cutting on those. Best of luck!

0
None
punkinann

4 years ago on Introduction

Love this! Wonder if there's any way to modify the arms/legs attachments so the arms and legs fall forward instead of to the side?

5 replies
0
None
XuZupunkinann

Reply 27 days ago

I did it. I basically tweaked the legs and arms a little and then rotated them from the pattern so they are more like the strip. Now he's in a seated position. You really don't need to do much except attach them differently. Also note that this will affect the stripes later on which I discovered...later on.

0
None
seamsterXuZu

Reply 26 days ago

Ah.. I hadn't considered how the stripes would be affected by a change to the arm and leg positions. Hopefully it worked out well enough. Got any photos!? I'd love too see how your Hobbes turned out : )

0
None
seamsterpunkinann

Reply 4 years ago on Introduction

That's one thing about this that I wasn't happy about. And I think you may be the first person to point it out!

With less stuffing and better positioning when they are sewn on, the arms and legs could be put in a more cartoon-accurate position. If I ever make another Hobbes, that is one thing I would try to do a little better.

0
None
mlaiuppa.seamster

Reply 2 months ago

check out how to make Teddy bears and you might find a way to get the limbs to be more forward. If you want to get really fancy, you can put in joints so the arms, legs and even head can move. They have plastic ones that eventually loosen but they are a bit safer for children. If you get him to sit, you can use plastic pellets in the bottom of the body to weigh him so he sits better.

0
None
XuZuseamster

Reply 2 months ago

I plan on trying to figure that out as I attach the arms and legs. If you look at the strip, Hobbes is in a more seated position with the arms to the front. I haven't got there yet but it seems that just tweaking and pinning first and adjusting the stuffing and folds should do it.

1
None
PortalCube13

1 year ago

How did you do the muzzle? Mine is really small and doesn't cover as much of the face as I would like . . .

2 replies
0
None
SteveB485PortalCube13

Reply 27 days ago

Mine also is much, much smaller than it should be, and I laser cut mine the exact size of the pattern. The material I used for the white is a furrier one, and so much stretchier I think--which could be why it's so small.

0
None
seamsterPortalCube13

Reply 1 year ago

Hmm. All of the info I have about the process is in step 11. There are dozens of of photos of people's Hobbeses here in the comment section . . does yours look nothing like any of these that others have made?

Perhaps you can share a photo of your muzzle so I can see where you're at with it, and maybe that way I can offer some assistance.

0
None
XuZu

4 weeks ago on Step 14

I'm still working on it. I'm seven weeks in. I see people made it in 4 days...can't imagine how. Anyway, it's going well. I'm finished except for the stripes. There's several things I've learned and a couple I was told...after the fact.

I wanted him firm so he sits well and doesn't flop but I put too much stress on the seams and there were a couple of holes. I had to patch them which went well and with the stripes, you hardly notice.

also, my mom told me not to stress the fabric...after I already had. I'll be finished by Christmas. I may make a second one with the lessons I've learned.

0
None
craig0a

6 years ago on Introduction

Hello everyone,

I would love to make this, but I am not near a fabric store. Trying to order the fleece online is a little nerve-wracking since the color on the computer never seems to be quite right.

If anyone goes to Joann Fabrics, could you recommend a nice orange fleece? The Blizzard Narcissus Gold looks like it would be a much nicer color than the Blizzard Persimmon Orange, but I am worried about buying a "gold" instead of "orange" for the fur. Otherwise is there another online store that you can recommend?

Also, the pattern doesn't have sizes... for a final product of maybe ~16" high, I am guessing I need about 1/2 yard orange, 1/4 yard black, 1/4 yard white, and maybe 16 oz of fiberfill?

Thanks in advance for any advice!

Anna

3 replies
0
None
FranciscoF57craig0a

Reply 5 weeks ago

Try Burnt Orange. Jo Ann’s carries it. Has a nice warm, autumn look.

0
None
seamstercraig0a

Reply 6 years ago on Introduction

Hi sorry for the delay in responding. The final doll stands about 15 inches tall. Buying a third or quarter yard of orange fabric will be plenty. White and black.. you only need a tiny bit. I'd get extra fiberfill, as it always comes in handy if you have some leftover, but it really stinks if you don't get enough to finish the current project the first time around.

As far as color... you're kind of on your own, but I'd recommend you go for anything called "orange." I don't have any experience buying fleece online, so I can't suggest any specific stores. Good luck, hope that helps. Be sure to post a photo here when you're done!

0
None
XuZuseamster

Reply 2 months ago

It's way late for the question but perhaps someone in the future will see it. I bought fleece blankets and a bathrobe. It's way cheaper than fabric..go figure.

0
None
XuZu

2 months ago

I want to thank you so much for the pattern...the instructions are amazing. I'm not a seamster but my son and I love Calvin & Hobbes so much I wanted to make it for him. I'm 4 days in and have made the body, arms, legs and head.

The instructions are easy to follow even for a noob.

One thing I want to ask...

How on earth did you figure out the pattern? How could you look at the drawings and figure out what shapes to make the pieces? Was it trial and error or do you pretty much have the skills to see it in your mind's eye...amazing!

2 replies
1
None
seamsterXuZu

Reply 2 months ago

Hey, I'm glad you're making one! Stick with and best of luck as you complete it!

As far as figuring out the pattern, I just tried to break it down into individual basic shapes. There was a little trial and error I think, with the head particularly, but it wasn't too bad : )

0
None
FranciscoF57seamster

Reply 5 weeks ago

Agree. This is an awesomely easy pattern to follow. First saw it a while back and wanted to make one for my granddaughter but I am in no way a skilled needle and stitch guy. Finally dove in and my wife helped out a lot. We plan on making more to share the Hobbes love.