Sugru Ipod Touch Stand

Intro: Sugru Ipod Touch Stand

I always hated haveing to hold my ipod when watching a film or video so after seeing sugru I decided to try to make one myself. If you like this instructable then please vote.

Step 1: What You Need.

To make the Ipod/Iphone stand you will need:

2x 5g packs of sugru.
1x scisors.
1x Ipod/smartphone.

Step 2: Construction

First you need to open the 1st packet of sugru and roll it into a sausage shape.
Then you will need to shape it around the ipod with some out of the back for support.
After that you will need to squash it into a more solid shape like a cradle (make sure its deep
and enough to hold the ipod sucrely and make sure the sugru fits around the ipod snugly .
Remove the ipod.
 Then repeat with the second pack.
Finally leave it to cure for 24 hours.

Step 3: The Finished Product.

When the sugru has cured put it on a flat surface and then put you ipod in the stand.
And there it is a ipod stand to watch your movies on.



    • Metalworking Contest

      Metalworking Contest
    • Audio Contest 2018

      Audio Contest 2018
    • Fix It! Contest

      Fix It! Contest



    4 years ago

    I like this! Simple, yet very creative, and good for everyday use! :)