Super Easy Stubby Holder

Introduction: Super Easy Stubby Holder

Stubby holder made from a Pringles container.

Step 1: Chop the Pringles Container Into Two Pieces Using a Box Cutter

...make sure that the bottom is about the height you want your stubby holder to be. Put a paper towel in there and trim the edges.

Step 2: Slice the Top Half

Slice the top half vertically like the pic.

Step 3: Put the Top Half in the Bottom Half

If you'd like you could print off a picture of, say, yourself and paste it on. Or a sticker. You're now good to go!

Step 4: Enjoy!

Simple.

Be the First to Share

    Recommendations

    • Exercise Speed Challenge

      Exercise Speed Challenge
    • Pocket-Sized Speed Challenge

      Pocket-Sized Speed Challenge
    • Audio Challenge 2020

      Audio Challenge 2020

    Discussions