Switch Board Secret Compartment!!

Published

Introduction: Switch Board Secret Compartment!!

About: I am commerce student. But have interest in electronics so I create things by taking inspiration from others.

Guys, this is my First Post! So please co-operate. 
I had this idea of using one of my own electric board as a secret compartment.
This is one of the most cost efficient way to hide your secret and valuable things!

Step 1: Materials and Tools

This is one of the most cost efficient way to hide, costing you almost nothing!
The tools and materials required for this project is:

1) Screw Drivers
2) Electric Switch Board (In case, if you don't have one big enough to hide your things)
3) Valuable things that you want to hide.

Step 2: Disassembling the Board

1) Disassemble the board using a pair of Minus Screw Driver. Insert it in the hole and push it forward to open the outer lid.
2) Open the two screws on the two side of the board to open the main panel.

Step 3: Placing Your Valuables

Now arrange your valuables inside the board.

Step 4: Assembling the Board Back

Finally, the last step, assembling your board back. After placing your valuables, put the front panel the way it was removed and fit the two screws on both the side. Then attach the outside panel and you'r DONE!!

Step 5: Conclusion

In this way you can make any switch board your secret compartment. I hope you like my First Instructable and Vote for me even if you haven't made it.
Any kind of Feedback is welcomed and will be appreciated.
Thank You!

Share

    Recommendations

    • Backpack Challenge

      Backpack Challenge
    • Oil Contest

      Oil Contest
    • Creative Misuse Contest

      Creative Misuse Contest

    Discussions