Introduction: Switch-shot Painting
In this instructable I will be showing you how to paint your switch-shot nerf gun. I am painting this to look like river songs handgun from doctor who.
Step 1: Opening
You have to open the actually launching part. Then remove the spring, plunger and other stuff that was shown in the picture above.
Step 2: Sanding
Put it back together without the plunger spring or white plastic thing. Now sand it down with light sand paper.
Step 3: Wax and Grease
Wipe it down with some wax and grease remover.
Step 4: Paint
I'm painting mine white, but you can choose any colour.
Step 5: The Rest
Them just sand and paint the trigger the bullet holder the flip down front and the button thing.
Step 6: Finished!
Just put it back together then your done!
Ps: sorry about picture quality. I took them on my iPod.