Materials and equipment needed:

1. Epilog Fusion M2 40"x28"

2. Juki DDL-8700 (any other industrial sewing machine)

3. Vegetable tanned leather (preferably double sided) 5-6 oz (2mm)

4. 44 segma snaps with octagon cap 12mm

5. 2 square loops 14mmx14mm

6. Top stitching thread

7. Leather glue


Step 1: Pattern Development

Step 2: Laser Cutting

1. Black line-cut

2. Pink line- engraving

Suggested laser settings:

Cut 85 power/ 10 speed

Engrave 30 power/ 30 speed

Step 3: Stitching

Stitch bottom piece to the body of the bag.

Step 4: Flap Assembling

Assemble flap of the bag as shown on the diagram.

Step 5: Stitching 2

Stitch flap to the body of the bag as shown on the diagram.

Step 6: Snap Attaching

Attach segma snaps. Follow directions: 3mm holes for snap caps, 4mm holes for snap underpart.

Step 7: Closing Snaps

Close the snaps and you're done!



    • Classroom Science Contest

      Classroom Science Contest
    • IoT Challenge

      IoT Challenge
    • Fandom Contest

      Fandom Contest