This is a cute bracelet I love it
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Supplies You Will Need
1. Rainbow loom set up as shown in the photo
2. Robber bands as many colors as you want
3. Your crochet hook or rainbow loom hook
4. A c-clip or s-clip
Step 2: Placing Some Bands
Placing the border bands is what comes first. These bands are just single bands as well. Place them where they are in the picture.
Step 3: Placing More Bands
Placing the twist bands is next and for each twist use three bands. Also place these bands where they are in the photo.
Step 4: Capping the Bracelet Off
The next step is capping the bracelet off. How you cap the bracelet off is pretty simple.
First what you want to do is wrap one single border color band around your hook twice.
Step 5: Finishing Capping the Bracelet Off
Finishing capping the bracelet off is simple as well. You take the single white band while it is still doubled and place it on the pin that it is being placed on in the photo.
Step 6: The Looping Process
The looping process is incredibly simple. You take your hook and pull back the capping band and grab the first band and take it to the side that it belongs to. Do the same thing again but with the other band under the capping band.
Step 7: What It Looks Like
This is what it should look like after you have done step six.
Step 8: Finished Looping All the Bands
This is what it should look like after you have finished looping all the perimeter bands one by one going under each and every band.
Step 9: Making a Slip Knot
Making a slip knot is simple.
1. you stick your hook in the groove and go under all of the bands.
2.take one single border color band and place it at the end of your hook
3. Pull it through and place both of them on your hook.
Step 10: Finishing Your Slip Knot
Take the band that is the one that is far away from the pointy part and pull it off and tighten.
Step 11: Taken Off the Loom
This photo shows you what it should look like when you take it off the loom.
Step 12: Adding an Extension
How you add an extension ...
Adding an extension is simple. Do what is in the picture to add a six link extension if you need more though just add more.
Step 13: Done the Extension
This is what it should look like when it is done just an ordinary single chain.
Step 14: The Finished Product
This is what the finished product should look like.
Now you have your very own Taffy Twist Rainbow Loom Bracelet
MJLOVER00 made it!