"Tankasaurus" Action Figure

Published

Introduction: "Tankasaurus" Action Figure

About: I'm handling most of the shipping here at Instructables, as well as learning to run the new 3D printers. Feel free to PM me if you have any concerns about receiving something in the mail.

This figure is one in a series of action figures featuring the faces of the Instructables staff. Using the technique detailed in this Instructable, we created a 3D model of mikeasaurus' face. I then used Meshmixer to attach his face to a model of a tank I found on a royalty-free model website. This figure was printed on an Objet Connex 500. Unfortunately, due to some rowdy play with the model (pew pew!) the barrel of the gun snapped off.

I have provided the STL file for anybody that wants to print their own, edit it, or just look at the model on the computer.

You can find the other action figures in the series here:

Ewilhelm - https://www.instructables.com/id/E-Killhelm-Action-Figure/

ShadyLogic - https://www.instructables.com/id/Coba-the-Fist-Action-Figure/

Kazmataz - https://www.instructables.com/id/Kazmattack-Action-Figure/

Canida - https://www.instructables.com/id/Canidapus-Action-Figure/

Lamedust - https://www.instructables.com/id/MaimDust-Action-Figure/

Share

    Recommendations

    • Clocks Contest

      Clocks Contest
    • Oil Contest

      Oil Contest
    • Water Contest

      Water Contest

    3 Discussions

    you should make one with a dinosaur!! it be awesome!! are you going to have a war against normal action figures?

    I saw that at Maker Faire! Fun, keep making them!