Introduction: Tech Dress
This is a littleBits project made by fashionable girls that love electronics.
The skirt is not only beautiful but it makes you feel special because while moving the lights will turn on. The Bits that we used are Power to take the energy from 9 volt battery and transmit it to Motion trigger Bit which will turn on the RGB LEDs when it detects motion. We also used Bits such as Fork and Wire to expand the circuit.
Step 1: Skteching
The first step that we made was sketching it. It was a easy step especially that everyone in the project was a girls, although we made some changes drawing it.
Step 2: Cutting
We fold the fabric the way to make a circle and cut it with scissors.
Step 3: Assembling the Circuit
We already know which bits we wanted to use, so we just put up the circuit together and made it work.
Step 4: Place the Bits On
The last thing we had to do was placing the bits on the skirt, we used shoes to do that and Enxhi was ready for the catwalk.