Technical Readout of Your Battle Station Push Board

Intro: Technical Readout of Your Battle Station Push Board

Step 1: What You Need

This is the easiest push board idea. All you need is a picture frame, a piece of cardboard to fit the frame, and some Starwars fabric from a fabric store.

Step 2: Preparation

In case you haven't figured it out, cut the cardboard to the size of the inside of the picture frame. This picture shows the cardboard already covered with fabric and inserted.

Step 3: Cover the Cardboard

wrap the cardboard with the fabric. pull it tight and tape it to the back of the cardboard.

Step 4: Put It in the Frame

Insert the cardboard in the frame. Hang the frame and you have a custom technical readouts push board. :-)

Share

    Recommendations

    • Tiny Home Contest

      Tiny Home Contest
    • Halloween Contest 2018

      Halloween Contest 2018
    • Metalworking Contest

      Metalworking Contest

    Discussions

    0
    None
    philip42

    5 years ago on Introduction

    I'm pretty certain I spotted a design flaw in those battle station schematics. You better be careful who gets to see this push board, wouldn't want it to fall into the wrong hands.