Technicians Tool Box Pc

This is my 1st ever instructable im only posting it as ive been reading the pc in a dewalt case and im now planning on taking that idea a stage further by adding a keyboard and monitor.
Right back to this one I made this a few years ago out of boredom more than anything else.
Sorry its not step by step more just pictures of the finished article.
The whole build was pretty easy with the only difficult part being the cutting of the case to allow cables to be plugged in.
Really all I have to offer is a bunch of pictures but if you do have questions feel free to ask.
I will make sure and produce step by step pictures of my next build

Share

    Recommendations

    • PCB Contest

      PCB Contest
    • First Time Author

      First Time Author
    • Big and Small Contest

      Big and Small Contest

    14 Discussions

    0
    None
    Zerocool818

    4 years ago on Introduction

    oh and you shouldn't leave the power supply open, it is pretty dangerous.

    0
    None
    smattinglyHandyBob

    Reply 7 years ago on Introduction

    i was planning to make mine completely portable and have an lcd in the lid, and for that i was going to use t view trp1177 and use a PicoPSU power supply and a regular lead-acid battery.

    0
    None
    smattingly

    7 years ago on Introduction

    did you bolt all this stuff to the case? I wanted to use a waterproof case and if you didn't I'm wondering how you mounted it all.

    0
    None
    capth00k

    8 years ago on Introduction

     Great Job man, looks really clean and I like your layout. 

    Handybob, It was just an old atx board I had lying around ive a couple of micro atx boards too so hoping to build one again only in a smaller box.
    Im also planning on a larger version in a dewalt case this time with an lcd in the lid section and both pc and xbox360 contained in the same unit.
    Rob

    0
    None
    stone3408

    9 years ago on Introduction

    Always wanted to this but, with a pelican case. Great job looks good. I'm waiting for a (free) motherboard/bios that will boot from usb. You could lose the hard drive and the DVD. There would also be a signifigant reduction in heat.

    get a slot loading drive instead of the normal tray loading one. It would look nicer and take up less space.