Temperature and Humidity Meter Using OLED Display

Introduction: Temperature and Humidity Meter Using OLED Display

About: I am explorer, learner and youTuber at PR ROBOTICS. I make videos related to arduino projects, tutorials, electronics, robots and drones.

COMPONENTS REQUIRED-

1. Arduino NANO: https://amzn.to/2HfX5PH

2. DHT11 sensor: https://amzn.to/2HfX5PH

3. OLED display: https://amzn.to/2HfX5PH

4. Breadboard: https://amzn.to/2HfX5PH

5. Jumper Wires: https://amzn.to/2HfX5PH

Purchase links are for INDIA only.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Circuit Diagram

After collecting all the required components. Download this circuit diagram for better understanding.

Step 2: Start Connecting

Put the circuit diagram in front of you and start connecting the wires.

Step 3: Configure Setting of Arduino IDE

Now, after completing the connecting open arduino IDE and select your board type and COM board. Also download and include the libraries.

Step 4: Code Uploading

Now, compile and upload the code.

Step 5: Testing

Now, just test your project.

Be the First to Share

    Recommendations

    • Trash to Treasure Contest

      Trash to Treasure Contest
    • Raspberry Pi Contest 2020

      Raspberry Pi Contest 2020
    • Wearables Contest

      Wearables Contest

    Discussions