The Best Beginer Knex Gun by "bannana Inventor"

Introduction: The Best Beginer Knex Gun by "bannana Inventor"

This is a gun you would make if you want a fast build. I know this is an awful gun, so don't expect the best gun in the world here, O.K..

Step 1: Pieces You Need.

These are the pieces/things you will need to make this gun.

Step 2: Build This.

Build what you see in the picture below.

Step 3: Build This.

I now this picture is blurry, but build what is in the picture.

Step 4: Build This.

This what you should have now, also add the last three pieces to the far right, and also the shooting lever.

Step 5: Build This.

Now add the yellow bar, and the RAM pin which is the gray rod connect to the orange double connector.

Step 6: Build This.

For the last step attach the rubber band the yellow rod that the firing lever pivots on and, onto the open orange connector side.


Thank you for building this gun. :)

Be the First to Share

    Recommendations

    • Exercise Speed Challenge

      Exercise Speed Challenge
    • Pocket-Sized Speed Challenge

      Pocket-Sized Speed Challenge
    • Audio Challenge 2020

      Audio Challenge 2020

    17 Discussions

    0
    altoids32
    altoids32

    11 years ago on Step 6

    how do you fire it? i suppose i'd have to build it to find out...

    0
    DJ Radio
    DJ Radio

    11 years ago on Introduction

    hey bannana inventor, you might want to delete this ible, or people will think you are a newb or something

    0
    bannana inventor
    bannana inventor

    Reply 11 years ago on Introduction

    They would know I'm not because all my other good stuff is all around the site. Plus couldn't they just look at my prfole picture and tell that I could make better things?

    0
    DJ Radio
    DJ Radio

    Reply 11 years ago on Introduction

    still, you dont want anything to be held over your head when you criticize another block trigger like this.......

    whats so bad about it??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

    0
    bannana inventor
    bannana inventor

    Reply 12 years ago on Introduction

    True, but I'm just saying check it out. It's actually a pretty descent gun.

    0
    codemaster2590

    I think that your little pistle that you made. The one with the instructions to it would work better as a machine gun bullet than a pistle. I do however like the one that you added in the comments part

    0
    bannana inventor
    bannana inventor

    Reply 12 years ago on Introduction

    Thanks, I'm uploading the images for it now. It will be posted tomorrow as a knex pistol or something.

    0
    wussap
    wussap

    12 years ago on Introduction

    wow, i dont know what to say except, very clear instructions! even a orangutan could build this out of your instructions! actually i take that back, even an orangutan can build something better than this NOT using your instructions :D:D:D:D:D:D:D:D