This airplane was created so that people can have fun throwing a plane that can successfully fly and can float in an outside environment where kids can perfectly play with it and have fun with it in all possible ways. To start off this amazing airplane I first needed to buy some materials to start constructing my airplane.
The supplies/materials I needed to start off with my product where a big square of styrofoam, scissors, a black marker and scotch tape.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 2: Step 2
In this second step what I did was that I started to design the wings of my airplane, so I traced the wings on the styrofoam square with a black marker.
Step 3: Step 3
The next thing I did was cutting the wings off of the styrofoam with the scissors so that we get the first thing ready.
Step 4: Step 4
I then isolated the wings and shaped them correctly by rubbing the sides of the wings, now they are well shaped and smooth.
Step 5: Step 5
Then, to balance the plane, the plane needed to have a piece on the front, so I traced the front tip with a marker.
Step 6: Step 6
I then cutted the front with scissors so that the plane could balance.
Step 7: Step 7
Next, I got the pieces together by pasting them with scotch tape so that it resists.
Step 8: Step 8
Then, I traced the tail of the plane so that the plane can perfectly balance and float.
Step 9: Step 9
After cutting the tail, I pasted all of the pieces together with scotch tape for my plane to be able to fly and float in the air which it effectively does. The beautiful airplane is done and ready to fly.
Participated in the
Make It Fly Challenge