The Jetiqui SSR

'S- 'Sling-shot
'S- 'Sniper
'R- 'Rifle

This was my first Instructable but i have made alot of k'nex guns

-High power and accuracy
-Didn't test it yet but can shoot with power for 40 feet
-Very low piece count for a sniper
-Won't jam (if made correctly)
-Easily modified
-Can shoot through a empty cereal box
-It can break the skin at point blank range
-2nd Handle
-True trigger

  • = fixed in V2

-Very slow reload time
*-It can break if not loaded right*
*-Not very practical for indoor K'nex wars*
-It can break the skin at point blank range
-No stock

It would be easy to put on a better handle,scope,stock,draw-string for easy loading & possibly a mag ,clip or auto loader feel free to mod my gun without consent, just mention my name.

sorry if some of the terminologie is wrong im pretty new

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Peices

These are the pieces you will need.
Sorry about the sideways
You wont need much of any other pieces

You do need to long bendy peices(gray size)

Step 2: The Handle

1-just follow the pictures pretty easy
2-clip the white piece on
3-clip the shorter one in the middle
4-clip the last one on
5-done the handle

Step 3: The Top Part of the Barrel

This one is the hardest part of the gun and if u get it wrong it will be hard to fix
It sholdnt be to hard if your experienced at knex guns

Step 4: Bottom Part of the Barrel

Pretty simple just follow the pictures.

The little blue connectors can be replaced with mostly anything

Step 5: The Trigger

This is the trigger pretty simple

look at the notes i made a mistake on it ,sorry

p.s. its design is from RMCONSTRUCTION

Step 6: Some Other Bits

1.sorry there was a mistake pretty simple
2.pretty simple follow the pics
3.make these
4.clip them on like so
5. put it togetherput them together

6.make this
7.make this

Step 7: Assembely

1.clip together
2.put this on
3.another mistake just look at the notes
4.just clip them on both sides
5.different angle
6.put these on

Step 8: Put on the Elastics

Step 9: Loading & Pulling the Trigger

Loading can be difficult but after some practice is easy

1. put the bullet in first
2.then pull the elastic back and hook onto the green connector piece

Step 10: 2nd Handle Optional

Its not very strong mostly for looks
It would be easy to make a better handle but i ran out of pieces :(

Be the First to Share


    • CNC Contest

      CNC Contest
    • Teacher Contest

      Teacher Contest
    • Maps Challenge

      Maps Challenge

    24 Discussions


    10 years ago on Introduction

    Where this says flimsy and can break the skin at point blank makes it not wanted to be made, ouch! I made it and tested it. gues how many *s?

    13 replies

    trust me, i've built my gun really, really big before, and it shot through a DS game case. all 1 CM of solid plastic.


    i know. but i'm not allowed to do electrical projects due to the fact that last time i did i set my pants on fire(don't ask)


    i wanted to record my project so i used a camera and tripod, and it recorded hard evidence that i burned down our shed, and now i can't get it off the cam

    Meh, all I had to do was rebuild the shed! It was fun! I got to work with electrical products and i found a way to burn my signature on grass, pics up soon

    first time i used power tools was when i was six. the nailgun made me fly across the room from the recoil :D

    teh, first time i used one was when i was 4 and wanted to help "dwaddy" i used the electric drill and it shook my whole body like a jackhammer! :'D. :X We went from why i hated this gun, to our first usage of power tools. Lol

    Once I was chatting with the teacher, so we went from why I didn't do my homework to lunch breaks and we ended up at talking about emos, then I said "what were we talking about again?" So we just kept chatting for 2 hours, for no apparent reasons.

    NYPAAn Villain

    Reply 10 years ago on Introduction

    Not really, You just add a semi auto wheel at the end and put a magazine in the middle.

    An VillainNYPA

    Reply 10 years ago on Introduction

    that is not a sling-shot single-shot though that is a multi-mecanism.


    10 years ago on Introduction

    could someone make a better 2nd handle i think it would improve it alot