The Nice Rack.

Introduction: The Nice Rack.

This instruction set will teach how to make a multipurpose rack out of pallets. It will give you valuable construction experience. I Wish you the best of luck and hope you have fun during this project.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Required Tools.

Step 2: Pallet Diagram.

Step 3: Collect a Pallet.

Step 4: Choose a Side of the Pallet to Use.

Step 5: Remove Boards 1, 2, and 3.

Step 6: Mark on the Wood Where You Will Be Cutting.

Step 7: With a Circular Saw Cut the Runners.

Step 8: Sand Down the Boards and Runners.

Step 9: Reattach Boards 1, and 2, to the Runners.

Step 10: Attach Board 3 to the Bottom of the Runners to Act As the Floor of the Rack.

Step 11: Sand the Rack to Smooth Out Edges and Fix Any Problems From Attaching Boards.

Step 12: Enjoy Your Nice Rack

Be the First to Share


    • Backyard Contest

      Backyard Contest
    • Silly Hats Speed Challenge

      Silly Hats Speed Challenge
    • First Time Author Contest

      First Time Author Contest