Introduction: The Star-burst Bracelet
This Is The star-burst bracelet that i'm gonna teach you how to make today!!!!
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Step 1:what You Will Need!!!! :)
Here is what you will need in order to make the star-burst bracelet!!!!!
Step 2: Step 2:The Base
How To start it is the first pic and then go down the row till the end and add the next rubber band diagonal then do the same to the other side!!!!
Then push all the rubber bands down!!!!
Step 3: Step 3:Placing the Stars
You follow the way it is going in the pictures which it is going counter-clock-wise and then you just do that all the way up the board!!!!!
Then push all those rubber bands down!!!!
Step 4: Step 4:Placing the Cap Band
MAKE AND 8 WITH A RUBBER BAND THEN PUT IT IN TO ITSELF THEN PUT ON SPOTS DIRECTED
Step 5: Step 5:Looping the Base
Loop the base like in the picture!!!
And do that all the way up with the other stars!!!!
Step 6: Step 6:Pull the Bracelet Off the Board
Be careful and pull the bracelet off the board by zig zagging it off the board!!!!
I forgot to put a picture in the middle but the reason why the hook is put through all the rubber bands you put the color of rubber band on the hook and pull it through and zig zag the bracelet off the board!!!!
Step 7: Step 7: Extension
Just Follow the steps in the picture!!!!
1 Person Made This Project!
- Elsa88 made it!