The Watering Pot-lamp.

Introduction: The Watering Pot-lamp.

At first, I opened a hole in the back side of the watering pot. Inside the watering pot I stuck a base for the bulb holder and passed the wire from the hole. After having screwed the bulb holder to the base, I connected the wire with the bulb holder. I used economic light bulb for a more smooth result.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Be the First to Share

    Recommendations

    • 3D Printed Contest

      3D Printed Contest
    • Motor Vehicle Contest

      Motor Vehicle Contest
    • Tiny Speed Challenge

      Tiny Speed Challenge

    Discussions