Tiny Freidy's Vehicle

Introduction: Tiny Freidy's Vehicle

About: As a young kid, my curiosity in electronics was compelling.... why does thunder interrupt the radio reception? ....why does ROBOTs run without any wire?.... and I've been hooked on making thing ever since.

IN THE STONE AGE,

Once upon a time......

The Freidy has an Vehicle.

i am wondering about how to remove

the power crowbar indeed !

so, that this iable make the tiny simple

(1.5v) running robot part_4.

1.easy,

2.1.5v AAA batt.

3. homemade,

4.electronic toy,

5. DIY .

Step 1: Materials

1) 1.5v AAA batt. * 1

2) cotton swab x 6

3) DC motor * 2(1 good and 1 from trash bin)

4) wires * 2

5) Aluminum foil roller *1(from trash bin)

6) cardboard * 1

7) foaming * 1

TOOLS :

cutter * 1

Step 2: Cutout Legs

use cutter to cut out two 8 cm small roller(s) as the robot wheel(s).

Step 3: Circuit

connect 2 copper wire from one motor to AAA battery.

cut the foam into some slices.

fill the foam into the roller between battery.

fill the foam into the roller between dc-motor(s).

Step 4:

cut 2 pieces, use cutter to cutout the two crowbar(s),

just cut 80%.

do not cut the cotton head off !

Step 5: Make the Seat and the Roof

and then connect to the dc motor's shaft(s).

HAVE FUN !

Share

    Recommendations

    • Furniture Contest 2018

      Furniture Contest 2018
    • Fix It! Contest

      Fix It! Contest
    • Tiny Home Contest

      Tiny Home Contest

    Discussions