Introduction: Transformable Extended Workbench Part 5
Profile 20 x 40 mm
4 x screw M6 x 60
4 x M6 nuts
4 x washers for M6
On the table specifies the location of the use of adapters.
In the profile table and drilled holes Ø 7 mm
Each fitting is attached with 2 screws
These fittings are designed to be anchored accessories
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: 9. Accessories
Each of the tables has its own outlet. Left Part 6 x ,Right Part 5x
Step 2: 10. Completion
First of all I apologize for my English. I hope that is clear enough to the manufacturing process. If any questions I answered on my site. You can also visit my page.
I would like to thank for help:
-My family, who supported me and my work
-Rado-Kovič-u for wing nuts and bolts, which gave me so I could finish the table.
-Andrenšek Domnu for film processing
-Tadeju Prančič-u to assist in recording
Ps: 2 questions
Is it true what I said at the beginning ?
You like ?