Transforming Ninja Star With 8 Points

58

1

Introduction: Transforming Ninja Star With 8 Points

Today you are going to make a transforming ninja star, the only materials you need is an 3x3 paper. And another thing this origami difficulty is medium

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1:

With one of the four squares, fold it in half by folding the upper left corner to the bottom right corner, then unfold.

Step 2:

Fold in half diagonally the other way, then unfold.

Step 3:

fold the half backwards, then unfold.

Step 4:

Poke the center with your finger so that it pops in.

Step 5:

fold the upper lest corner to the center, but don't fold pass the center divider

Step 6:

fold the bottom left corner to the center

Step 7:

fold the upper half to the lower half while inverting the right crease to the center

Step 8:

make 7 more of these for a total of 8 you can go back to step 1 to make it

Step 9:

Put one blade between the double flaps of another blade. Just like in the picture, the purple blade is placed between the flaps of the red blade.

Step 10:

Fold in the flaps of the left (red) blade to lock the right (purple ) blade into place. Then pull down the right blade so it locks at the end.

Step 11:

Add another blade to the flaps of the right one and also lock that into place

Step 13:

Lock the last to the first blade and you have yourself a frisbee.

When locking the last blade, make sure to only lock the sides of the first blade and not accidentally lock the second blade also.

Step 14:

with both hands, hold opposite sides and begin pushing I toward the center

Step 15:

Now you have an 8 point ninja star.

5 139
168 12K
20 3.0K