Transistor As a Switch | BC547 | Electronic Tutorial

#CircuitDIY


Today in this video tutorial i am going to show you Step by Step

How to use transistor as a switch in a circuit

Please Subscribe / Like Facebook Page

https://www.youtube.com/channel/UCi6ZqREHDIx2xLrCRkrRS0w

https://www.facebook.com/Circuit-DIY-122206971927665

Download All Data Files

AT ► https://www.file-up.org/74r71o1jla0k

You Will Find Full Project Description and All Useful Material Including

  • Circuit Diagram / Schematic
  • Hardware / Component List
  • Code
  • Datasheet
  • Pin Configuration Etc

AT ► Thanks for Watching It.

↪ For Any Difficulty Please Comment Below

Step 1: Hardware Required

Hardware Required

  • ► BC547 NPN Transistor
  • ► Switch / Push Button
  • ► LED
  • ► 1k Resistor
  • ► 330 Resistor
  • ► 9V Battery and Clip
  • ► Breadboard
  • ► Jumper Wires

Step 2: Steps

Follow All Steps Carefully from the Video Above (Recommended)

  • ► Place Transistor on breadboard
  • ► Connect Emitter to ground of battery
  • ► Connect LED & 330 Ohm Resistor to Collector of BC547
  • ► Connect 1k Resistor and Switch to Base of transistor
  • ► Power up the circuit with 9V Battery

Step 3: Useful Data

Share

    Recommendations

    • Arduino Contest 2019

      Arduino Contest 2019
    • Trash to Treasure

      Trash to Treasure
    • Tape Contest

      Tape Contest

    Discussions