Introduction: Trash Boat
I made this project in banjarapalya makerspace.
Maker: Muniraju G
Hot glue gun
Ice cream stick
2 Battery holder
Step 1: Make a Body
In this image I took rectangular shaped thermocol and fixed switch as shown.
Step 2: Cuting a Cardboard
Now I took cardboard, then cut it to make the house, and fix it to body with the help of glue as shown in the image.
Step 3: Fixing Motor and Battery
- In this step I fixed the 3volt battery on the thermocol then connect wires to switch.
take one 15cm flat surface wood piece now fix the motor with fan to the wood piece with the help of glue.
- now fix the wood piece at the back side of the body ( which should be inclined downward position ) and also connect the wires switch to motor.
- now our bot is ready to move.