UV Led Exposure Box DIY

Introduction: UV Led Exposure Box DIY

About: I am from Thessaloniki Greece! I love the world of electronics in every step of my life! I am electronic engineer and my hobby is my job!The summer of 2014 i'm raedy to begin my own company oramasolutions a...

Here you can find a photo tutorial about the construction of the project!

The electronic parts that you will need are:
- 48 high power uv leds (prefer straw hat)
- 8 resistors 150 Ohm 1/4 watt
- 24 VDC power supply

How to construct.

It is a simple idea.
There are 8 paraller arrays that consists from 6 leds in serries with a resistor (150 Ohm).
We power them up with 24 VDC.

Tests.

After a lot of tests we notice that the best exposure time is about 2,5 minutes.


Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Be the First to Share

    Recommendations

    • Trash to Treasure Contest

      Trash to Treasure Contest
    • Raspberry Pi Contest 2020

      Raspberry Pi Contest 2020
    • Wearables Contest

      Wearables Contest

    Discussions

    0
    salexandridis

    Opa kai Instructable! Mpravo kai pali! Poly kalh doyleia! HLEKTRONIKA.GR! Vale kai tis photo me to louloudi!