Classic USB leather bracelet.
In this instructable I'm going to show you, how to make your own USB flash drive bracelet. Always wear your memories, let’s make it!
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Material and Tools
Variation Fabric (i used 0.5 mm)
Leather (i used 1,5mm )
Stainless Chain (i used D : 0,5mm)
Stailess Clip (Connection)
Lighter (dispose leather)
Step 2: Measure
Measure the leather, *resize :
Cut the leather 19cm. * or a length that matches your wrist
usb size : (4cm+5cm)usb body + (3m)cover
wrist size : (19 cm)
Step 3: Dispose and Sew the Leather
Dispose and sew the Leather.....
Step 4: Sew the Fabric
Variation fabric (i used 0,5mm) for brace bracelet
Cut the fabric to a width 4,5 cm x 0.5 mm
Sew the fabric
Step 5: Cut and Dispose
Cut the leather and make a hole for Connect the Usb and Bracelet
Step 6: Connect the Stainless Clip
Connect the Stainless Clip
Step 7: DONE
Finally you can use this Classic usb bracelet!