Use Windows CMD to Create a WIFI Hotspot




Introduction: Use Windows CMD to Create a WIFI Hotspot

Although some softwave can create the WIFI,But I don`t want to install too much softwave.So I find a way that you don`t need install anything.(it may not use in Desktop PC,if your PC don`t have WLAN card).

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Open the Windows Cmd

  • press the Win && R in your keyboard.
  • you will see a windows like the pictrue.
  • input 'CMD' and press enter.

Step 2: You Will See a New Window Like This.

Step 3: Set Your Wifi Name && Wifi Key

in your cmd input
netsh wlan set hostednetwork mode=allow ssid=[param1] key=[param2]

param1:your wifi`s name
param2:your wifi`s key(should more than 8 character or number)

in the picture I set my ssid(my wifi name)=YourWifiName,and key(my wifi key)=YourWifiKey

Step 4: Open Wifi

we need input

netsh wlan start hostednetwork

in CMD.

Step 5: NOW!you Can Use the WIFI.

Step 6: Stop Your WIFI

Just input
netsh wlan stop hostednetwork

in CMD.

the WIFI is close.

Be the First to Share


    • LED Strip Speed Challenge

      LED Strip Speed Challenge
    • Sculpting Challenge

      Sculpting Challenge
    • Clocks Contest

      Clocks Contest

    2 Discussions


    3 years ago

    it's very good.
    thank you.


    Reply 3 years ago

    Thanks,I will share more useful skill.